- Connect 1 2 1 – Phone Calls Using Bluetooth Connection Instructions
- Connect 1 2 1 – Phone Calls Using Bluetooth Connection Free
Smartphone with Bluetooth capabilities (tested on Samsung Z1 with Tizen 2.3 and Samsung Note 3 Neo with Android 4.4.2) Installing utilities Python packages, bluez5, ofono, and ofono-test are required to pair Tizen:Common device with a smartphone and to make a phone call. 1 Connect the USB charging cable between your PC/laptop and Roger On 2 During the phone call, speak into the integrated PC/laptop microphone or use an external microphone as shown on the previous page 3 Hear the caller's voice in both ears! PC/laptop for phone calls over internet (VoIP, e.g., Zoom, MS Teams) via USB cable Required device.
Flyer expert 2 1. Step by step tutorial how to pair and connect with Bluetooth a device with Tizen:Common to a smartphone, and after that to make a phone call using Bluetooth Hands-Free Profile (HFP).
- 2Installing utilities
Required hardware
- Device with Tizen:Common such as MinnowMax, Intel NUC, HummingBoard, RaspberryPi 2, etc.
- Bluetooth USB dongle (compatible with GNU/Linux distributions)
- Smartphone with Bluetooth capabilities (tested on Samsung Z1 with Tizen 2.3 and Samsung Note 3 Neo with Android 4.4.2)
Installing utilities
Python packages, bluez5, ofono, and ofono-test are required to pair Tizen:Common device with a smartphone and to make a phone call. Bluez5 is included by default in Tizen:Common but you need to install the other packages.
Using Tizen on Yocto images
Edit local.conf and append the following line to build and include the required utilities:
Using GBS images
Run the following commands as root:
Bluetooth device pairing
Follow the step by step instructions to connect device with Tizen:Common (or another Tizen 3 profile) to a smartphone over Bluetooth:
- Turn on Bluetooth on the smartphone and make it visible for other devices
- Plug the Bluetooth USB dongle into the device with Tizen:Common
Verify that the Bluetooth USB dongle is detected: Unite 3 0 13.
- Bring up the Bluetooth USB dongle:
Edit local.conf and append the following line to build and include the required utilities:
Using GBS images
Run the following commands as root:
Bluetooth device pairing
Follow the step by step instructions to connect device with Tizen:Common (or another Tizen 3 profile) to a smartphone over Bluetooth:
- Turn on Bluetooth on the smartphone and make it visible for other devices
- Plug the Bluetooth USB dongle into the device with Tizen:Common
Verify that the Bluetooth USB dongle is detected: Unite 3 0 13.
- Bring up the Bluetooth USB dongle:
- Start bluetoothctl:
- Power on the Bluetooth controller:
- Enable the agent and set it as default:
- Set the Bluetooth controller as discoverable for 3 minutes and pairable:
- Scan for other device to retrieve the smartphone:
- Find out the MAC address of the smartphone:
- Pair with the smartphone:
- Enter 4 digit PIN if prompted. Enter the same PIN on the smartphone.
- Allow the service authorization if requested.
- Trust the smartphone:
- Connect to the smartphone:
- Verify that the smartphone is successfully connected and display information about it with the following command:
- The device has been successfully paired with the smartphone and you now can exit bluetoothctrl:
Connect 1 2 1 – Phone Calls Using Bluetooth Connection Instructions
Making phone calls
Connect 1 2 1 – Phone Calls Using Bluetooth Connection Free
After pairing the device with Tizen:Common (or another Tizen 3 profile) to a smartphone you can initiate phone calls from the device using a python script provided by ofono: Suicide guy 1 0.
- Login as root
- Replace phone_number with the corresponding number that you would like to dial and execute the following command:
See also
